He had two of them and I picked this one. These are highly collectible signs and make beautiful presentation pieces for restaurants, man caves, kitchens and rustic cabins. The condition isn't perfect. However, the colors are bright and the sign is stunning.
There are multiple bends in the sign if you lay it down flat you can the waves and that it doesn't sit perfectly flat. Minor scuffs and a few rust spots but nothing serious. At some point, someone went over the "Coca-Cola" logo with what I suspect was a brillo or Scotch brite pad to clean the letters. The abrasions are not apparently evident until you examine it closely but it's worth mentioning for full disclosure.
Wear, bends and rust are excellent indicators that the sign is original along with comparison of other known original examples. It has the proper REG.
OFF exactly where it is supposed to be, rolled edges as it should and made out of the right tin. I have examined the font as well as the maker's mark: C&P - L. MADE IN USA 7-49 and I'm convinced this sign is 100% original so rest assured it's the real deal and not some fake from China. I don't sell fakes or reproduction signs unless stated as such and I guarantee this to be exactly what it is, an original unrestored "Drink Coca-Cola" sign from the late 1940's. Ten tips to help you spot a fake Coca-Cola porcelain sign.Rimarily solid blue or solid green Coca-Cola signs simply never existed. Blue or green were often used as a secondary color, but never the main body of the sign. Coca-Cola red is (and always has been) strictly monitored to maintain an exact appearance.
A red colored sign than seems to "off colored" any be a signal that the sign is not authentic. When known, compare the position of the original mounting hole positions to the positions on the suspected fake sign. If they are different then, this is usually a signal that the sign may not be authentic. A sign that has no mounting holes is also probably fake, since all signs are attached to either a wall, frame, or hanging bracket in some manner.
Some porcelain Coca-Cola signs used grommets, some did not. Typically grommets should not look new, unless the sign is unused. Old grommets should have the appropriate patina of age and sometimes some chipping and rusting underneath.
The Coca-Cola logo is and was one of the most closely monitored assets of the Coca-Cola Company. By the 1920's it became very standardized in form and usage.
A crudely drawn, out of proportion logo is a major indication that a sign or object is not authentic. Most old authentic signs had a stamp of the manufacturers name and production date located in a discreet area of the image.
Some of the newer signs also have a manufacturers name applied to make the sign appear authentic. Remember that simply having an old date on the sign does not mean that the sign it is actually old! Coca-Cola signs were made by professionals artists and sign manufacturers, which translates to near perfect. The Coca-Cola company would have allowed no less. Crudely drawn lettering or a lettering font that comes from today's computers was not used.When porcelain signs are manufactured, each color is applied one on top of each other. Each applied color is made to overlap the other colors slightly to allow for any misalignment of the image.
This overlap or buildup of enamel is referred to as "shelving". It is usually very noticeable on older signs when held at an angle or running your fingers over the surface. Newer signs don't always have this attribute. The iron substrate used in older signs rusts differently than the newer steel based signs. The newer signs often have an orange powdery looking rust in chipped areas.Old signs that have actually hung outside develop a dark brown or black colored rust that is much different looking than the "new" rust. The porcelain finish is very durable, but since it is glass based, it also brittle enough to fracture in a shard-like manner when tweaked, bent or hit. Original chips should expose paint layering and have dark brown or black looking rust. Chips should also be present in areas of use such around the hanging holes or attachment holes. Sometimes edges have been nicked during movement or while the sign rubs against a frame. Be very careful to trust your instincts as to whether the chipping is natural or applied to deceive. Edges are typically chipped in small random spots along the edge where the sign has been nicked by an object.
An overall continuous pattern of edge chipping is often cause for concern. Modern production methods often produce a rail mark or consistent tracking marks across the porcelain on the back of the sign. The presence of these marks often (but certainly not always) signal the sign as a reproduction. But be aware that some signs after 1950 also have these production marks as well.
The item "Original Authentic Vintage tin Drink Coca-Cola painted sign dated July, 1949" is in sale since Thursday, October 18, 2018. This item is in the category "Collectibles\Advertising\Soda\Coca-Cola\Signs".ordnance" and is located in Ellisville, Mississippi. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.